BreatH2 is equipped with a special sensor that stops the machine at a LOW level of electrolyte in the system and the INDICATOR LIGHTS WITH YELLOW. The yellow indicator light indicates when distilled water should be added. Just open the refill cap and add 0.5 litters of distilled water.
BreatH2 is equipped with a special sensor that stops the machine at HIGH PRESSURE in the system and the INDICATOR LIGHTS WITH GREEN. The green indicator light indicates that the pressure in the system has increased by more than 0.6 bar. Check for hose, bent or twisted hose. Also check for clogging of the hose or gas outlet pipe from the bubbler.
BreatH2 is equipped with a special sensor that stops the machine at a HIGH TEMPERATURE in the system and the INDICATOR RED. The red indicator light indicates that the temperature in the system has risen more than 50 C. Put BreatH2 in standby mode (see item 5) and wait 1 hour, then use BreatH2 normally.
The water in the bubbler is recommended to be changed every week, regardless of whether BreatH2 is used or not. To do this, simply unscrew the bottom of the bubbler, pour the contents and add to the marker level distilled or tap water.
The elements used in the BreatH2 are certified with a CE quality certificate and / or are manufactured by companies standardized according to ISO. The BreatH2 electrolyzer itself meets the requirements of Directive 2006/95 / CE.